Keep Water at the Right Temperature
An electric boiler and warmer is a kitchen appliance that keeps water
at a constant hot temperature for hot drinks and other culinary uses.
Simply fill the pot with water and plug it in. It boils the water to
212°F and keeps it at a set temperature all day long. With an electric
boiler & warmer, hot water is ready all day long at the touch of a
button for hot tea, instant coffee, instant noodles and even baby
formula. Each model features different hot water temperature settings
depending upon your needs.
Smart Kettle variable temperature settings: 122°F - 212°F, with +2°F digital reading accuracy
A guide to what temperatures are best suited for:
| Temperature | Use
| | 208°F / 212°F | Make instant coffee, instant noodles and instant oatmeal; brew Chinese
tea, black tea, powdered green tea (matcha); prepare vegetables;
anything that requires boiling water | | 195°F / 175°F | Brew certain green teas (bancha, houjicha, genmaicha) | | 140°F |
Brew high quality green tea (gyokuro); prepare baby formula
|
Frequently Asked Questions
Can the electric boiler & warmer pot be used to heat other liquids?
No, the electric boiler & warmer is for water only.
How long does it take to boil water in an electric boiler & warmer?
It depends on the temperature of the water and the amount, but it
usually takes anywhere from 3-9 minutes. What are the advantages of this kettle over a Zojirushi Water Kettle?
The Smart Kettle is more energy efficient, in that the unit will automatically shut off after 1) it's been sitting on the base untouched for over 40 minutes, or 2) the kettle reaches the desired temperature and is taken off its base to be poured. If reheating is desired, just press the On/Off switch again. This prevents the water from repeated reboiling throughout the day.
How can I clean the water deposits in my Smart Kettle?
We recommend you clean the pot periodically every 1 to 3 months, by
following these instructions using a natural citric acid recipe:
1.
Fill a glass with warm water and add 1/2 cup of lemon juice from
concentrate. If using freshly squeezed lemon juice, please be sure to
strain first, so the pulp does not get caught in the pump and damage
the pot.
2. Fill the electric boiler & warmer with water and pour the lemon juice mixture into the pot. Boil the water.
3. After the water is boiled, let it sit for approximately 2 to 3
hours. If necessary, you can let it sit for 6 to 12 hrs.
4. Empty the pot by pouring out the water and wipe the inside of the
pot using a clean towel. If the pot is still dirty, repeat steps 1
through 3.
5. Fill the pot with clean water and set to boil. After the water is
boiled, dispense the water to flush out any lemon juice mixture that
may be trapped in the water gauge tube. |
